Product
Contact Us
Sales Contact：
Email：market@gepon.com.cn
Skype：lygandwsr
WeChat：13686800918
Technical Support ：
Email：support@gepon.com.cn
Email：market@gepon.com.cn
Skype：lygandwsr
WeChat：13686800918
Technical Support ：
Email：support@gepon.com.cn
10G Ethernet Switch S5700-48T4TF
10G Ethernet Switch S5700-48T4TF
The 10 Gigabit switch S5700-48T4TF of SmartFiber is a BCM chip series of standard three-layer non-blocking switch. It is equipped with 48-bit 10/100 / 1000M RJ45 electrical ports, 4 integrated 10G SFP + optical ports, and one console port to provide sufficient bandwidth. It provides high capacity switching capability and supports Layer 3 and Layer 4 ACLs. Features. Perfect security control strategy and CPU protection policy to improve fault tolerance, ensure stable operation of the network and link load balancing. At the same time support automatic DoS attack defense and SNMP, IEEE 802.1, spanning tree, spanning tree protocol, Link aggregation and other functions, suitable for small and medium enterprises, campus network, Internet cafes and the edge of the use of metropolitan area network.
-
1.2.1 High performance
l With 300G backplane bandwidth
l hardware routing, wire-speed three-tier exchange packet forwarding rate of 223.2Mpps
l can be deployed in the metropolitan area network core, and provide a few last 1 km technology
l Ethernet / IEEE802.3 packet size (64 bytes to 1522 bytes)
● Large data packets up to 9216 bytes
1.2.2 Safe and reliable
●Provide DOS, distributed denial of service, spoofing and viruses and other defense
● Support IEEE802.1x, providing port-based user authentication, network shield technology,security control technology and policy control list
● Limit the maximum number of ports connected to the host, the Ethernet interface for multiple binding, increase bandwidth and system redundancy
●Strong ACL, support L2-L4 layer data filtering
1.2.3 Easy to use and maintain
●Can be through the Web, SNMP and other ways to manage
●Support XModem protocol, you can through TFTP / ZMODEM software upgrades and BootRom upgrade
●Support SFP +, but also backward compatible with XFP and so on
1.2.4 Powerful traffic and broadcast management
●Automatically detect and suppress broadcast storms, support IGMP message detection, effectively limit the proliferation of broadcast messages
●Support full-duplex mode and half-duplex mode of flow control
●Supports the Ethernet interface to 1M speed limit
-
Brand name SmartFiber Product model S5700-48T4TF Basic characteristics Fixed port 48*10/100/1000M RJ45 electronic port,4* integrated10G SFP+optical port、1*Console port Backplane bandwidth 300Gbps Packet forwarding rate 223.2Mpps Processor RISC 400 Flash memory capacity 16MB Memory Capacity 128M MAC address table 16K Queue buffer 3MB Software specification Security features IP+MAC+PORT+VLAN Bind
ARP detection
DOS protection
Port protection
IP source port protectionVLAN Port based VLAN
802.1Q VLAN
Based on IP
Based on MACAddress table Static MACaddress table
Dynamic MAC address tableStorm control Broadcast suppression
Multicast suppression
DLF suppression
Inhibition rateFlow control Half-duplex based on back pressure control
Full duplex based on PAUSE framePort mirroring Supports port mirroring Port management General settings
Port statistics
Configure the port
Port aggregation
Port isolationService quality IEEE 802.1Qau congestion mechanism
The 8 send queues per port map the 8 priorities of 802.1pIP service Ping detection
DHCP detectionSpanning tree MSTP(802.1s)、STP、RSTP Multicast management IGMP Snooping Multicast packet detection Syestem management SNMP v1/v2/v3
Console management
TELNET mode
WEB interfaceRemote upgrade Support upgrades via web implementation
Support for local version upgradesphysical dimension 440mm × 285mm × 44mm Power supply characteristics AC 110-240V Adaptive，47-63Hz，1A/230V， Power ≥80W Indicator Power indication, system indication, connection / send and receive instructions Environment temperature / humidity 0-50 ℃ operation, -40-70 ℃ preservation, 0-90% non-condensing
发邮箱
在线客服
在线客服